WALL PUTTY WHITE

Speed Dry Mix – Wall Putty – White is a White Cement Based Polymer Modified Putty suitable for all internal walls, ceilings areas, ducts, lobbies, stair case soffits can be covered with this Putty. It does not require any curing post application. High Quality Mineral Fillers and Polymers are used while manufacturing the product.

FEATURES AND BENEFITS

  • No flacking and Blistering
  • No hacking is required on Concrete substrates
  • Enhances life of paint
  • Can be applied with Putty Blade / Spray Machine
  • Water resistant
  • Durable
  • UV Resistant
  • Time Saving - Excellent Spreadability
  • Cost Effective when compared to Acrylic Putty
  • Consistent Quality

Product Data

Colour White
Main Binder White Cement
Fine aggregate Graded Limestone Powder ( 240 Mesh )
Polymers Special Polymers having a) adhesion and b) Self Curing Properties
Bulk Density 1150 Kg/CuM
Pot Life 120 mins
Compressive Strength, 28days 8.00 -10.00 N/mm square
Adhesion Strength, 28 days 0.90 - 1.00 N/mm square
Shelf Life 6 Months

SURFACE PREPARATION

Surface must be free from dust / loose particles, grease, mould oil, rust metal, wood peels, paints and plastics. Sand Paper, putty blade or wire brush can be used to remove loose particles.

MIXING AND APPLICATION

Approx. 30-35% water (by weight of material) is required for mixing. For better results, mixing should be preferably done with mechanical mixer/stirrer. Mixing would normally take about 3-5 minutes. The material should be applied within 2 hours of preparation. Ideally the thickness of Putty (including 2 coats) should not exceed 2mm. The time gap of 4 hours between two coats should be kept.

CURING

No curing is required. Natural air curing is enough.

Storage and Packaging

Speed Dry Mix - Wall Putty White is delivered in 40Kg & 20Kg bag. Also available in 1 Kg and 5 Kg pouches.
Storage life is six months.

HEALTH AND SAFETY

Recommended to wear NIOSH approved or equivalent particulate face mask when mixing the material. Keep out of reach of children. Although Product contains only Non-toxic materials, care should be taken to avoid dust inhalation while mixing and handling

DISCLAIMER

It is assumed that all standard Civil Engineering Practices shall be adopted for application of the Wall Putty. The information given in this leaflet is for general guidance only.