ELASTO SEAL

SPEED DRY MIX – ELASTO SEAL is a high quality Cement Based Elastomeric Polymer Modified Compound suitable for all Waterproofing work wherever site conditions demand High performance waterproofing coat to arrest leakages /Seepages and dampness . It is a Specially formulated material that does not require any curing post application. High Quality Elastomeric agents , binders and fillers are used to ensure High level performance.

FEATURES AND BENEFITS

  • High Performance polymer modified cementitious waterproof coating
  • Impermeable coating withstanding capacity of 6 Bars on positive side
  • Capable of handling 1.5 Bar when applied on negative side
  • Single component hence does not require mixing of various ingredients at site, ensuring accuracy and consistent quality
  • Ease of application.
  • Dual benefits of waterproofing and crack-bridging.
  • Flexible coating, hence niches, corners etc. can be covered easily
  • Elastomeric, hence no effects against weather variations

Product Data

Appearance Free flowing powder
Colour Light Grey
Density 1250 - 1300 Kg / CuM
Water demand, % 30
Applicability Can be applied by brush
Touch dry, minutes 30 - 40
Coverage (2 coats on concrete) 1.20 m square/ Kg i.e. 13 Sq. ft/kg
Tensile Adhesion test (28 days) 1.10 N/ mm square (Req. 0.5 N/mm square )
Water absorption, ( Karsten Tube) 0.2 ml in 24 hours
Water impermeability Passes 6 Bar pressure(Req. 1.5 Bar )

Standard Construction practices should be adopted for surface preparation, mixing and application. Approx. 30% water ( by weight of material ) is required for mixing

CURING

Natural air curing is enough.

Storage and Packaging

Speed Dry Mix - Elasto Seal is delivered in 25 Kg bag. Also available in 5 kg pouch. Storage life is six months if the product is stored in a dry place.

HEALTH AND SAFETY

Recommend to wear NIOSH approved or equivalent particulate face mask while mixing the material. Keep out of reach of children. Although Product contains only Non-toxic materials , care should be taken to avoid dust inhalation while mixing and handling

REFERENCE CODES

Waterproofing and Damp-Proofing (CED 41)
IS 1346:1991 ; IS 3067 :1998