TTILE ADHESIVE HD Grey IV
Speed Dry Mix – Tile Adhesive HD is a high quality Cement based Polymer Modified Tile Adhesive which is used for fixing large format tiles and stones for both floor and walls . No curing is required after application. High Quality Polymers are used to provide High Adhesion and Self Curing properties. This product also demonstrates excellent performance under water.
TTILE ADHESIVE HD Grey III
Ready to use Adhesive for fixing both floor and wall tiles Available in 40/20 kg bags, in dry form; No curing is required after application
PRODUCT
FEATURES AND BENEFITS
- Formulated to comply with Indian Standards IS 15477:2019
- Hassle free and Time saving
- Ease of application <li.Excellent Bond Strength
- Water resistant
- Consistent Quality
- High Durability
PRODUCT DATA
| Colour | Grey |
| Main Binder | Ordinary Portland Cement |
| Fine aggregate | Processed, Graded Sand (Max size of aggregate: 600 micron) |
| Polymers | Special Polymers having a) adhesion and b) Self Curing Properties c ) Anti slip agent |
| Bulk Density | 1400-1500 Kg/CuM |
| Coverage | 45 Sq ft per 40 kg bag for a bed thickness of 6 mm 23 Sq ft per 20 kg bag for a bed thickness of 6 mm |
| Pot Life | 120 mins |
| Open Time | 30 mins |
| Compressive Strength , 28 day | 13.00 - 15.00 N/mm2 |
| Tensile Adhesion (N/Sq mm) , Dry Condition , 28 day | 1.60 to 1.85 |
| Tensile Adhesion (N/Sq mm) , Wet condition | 1.20 to 1.50 |
| Shear Adhesion , dry condition24 days (N/Sq mm) | 1.55 to 1.80 N/Sq. mm |
| Shelf Life | 6 Months |
SURFACE PREPARATION
Ensure the substrate is clean and free dust, oil, grease and loose particles before application. Dampening of substrate is required before applying Tile Adhesive. Checking the Verticality/ plumb level of substrate is essential. Ensure that new concrete substrate/Masonry wall is at least six weeks old and screeds/cement sand base coats is minimum 14 days old before applying such Adhesives.
MIXING AND APPLICATION
21-22% water (by weight of material) is required for mixing. Mixing can be done either manually or with mechanical mixer / stirrer. It is advisable to use a mechanical Mixer to get homogeneous mix. The material should be applied within 90 minutes after preparation. It is recommended to apply Tile Adhesive with a Notched Trowel that can provide about 6 mm thick layer. It is recommended to have thickness between 3-9 mm. Grouting Activity can be taken after 24 hours and designed / full Traffic be allowed after 48 hours of installation.
CURING
No curing is required. Natural air curing is enough.
STORAGE AND PACKING
Speed Dry Mix - Tile Adhesive LD is delivered in 40 Kg and 20 Kg bag. Storage life is Six months if the product is stored in a dry place.
HEALTH AND SAFETY
- Recommended to wear NIOSH approved or equivalent particulate face mask when mixing the material.
- Material contains cement, which may produce an allergic effect.
- Keep out of reach of children.
- Material may cause irritation to eyes and skin.
- In case of contact with eyes, rinse immediately with plenty of water and seek medical assistance. After contact with skin, wash immediately with plenty of soap and water. Avoid contact with eyes and prolonged contact with skin.
DISCLAIMER
It is assumed that all standard Civil Engineering Practices shall be adopted for application of the Tile adhesive. The information given in this leaflet is for general guidance only.