TILE ADHESIVE LD Grey I

Speed Dry Mix – TILE ADHESIVE LD is a high quality Cement Based Polymer Modified Tile Adhesive which is used for fixing Ceramic and Vitrified Tiles on the floor and wall surfaces . No curing is required after application .High Quality Polymers are used to provide High Adhesion to substrate and self Curing Properties. This product also demonstrates excellent performance under water.

TILE ADHESIVE LD (Grey )

Ready to use Adhesive for fixing Vitrified and Ceramic Tiles ( Floor & wall) Available in 20 Kg & 40 kg bags , in dry form; No curing is required after application.

PRODUCT

Speed Dry Mix – TILE ADHESIVE LD is a high quality Cement Based Polymer Modified Tile Adhesive which is used for fixing Ceramic and Vitrified Tiles on the floor and wall surfaces . No curing is required after application .High Quality Polymers are used to provide High Adhesion to substrate and self Curing Properties. This product also demonstrates excellent performance under water.

FEATURES AND BENEFITS

  • Formulated to comply with Indian Standards IS 15477:2019
  • Hassle free and Time Saving
  • Ease of application
  • Excellent Bond Strength
  • Water resistant
  • Consistent Quality
  • High Durability
  • Negligible Wastage

PRODUCT DATA

Colour Grey
Main Binder Ordinary Portland Cement (Grey/White)
Fine aggregate Processed, Graded Sand (Max size of agregate : 600 micron)
Polymers Special Polymers provides a) High adhesion and b) Self Curing Properties
Bulk Density 1450 Kg/CuM
Coverage Coverage 45 Sq.ft. from 20 kg bag considering bed thickness of 3mm
Pot Life 120 mins
Open Time 30 mins
Compressive Strength , 28 day8.00 - 12.00 N/mm2
Tensile Adhesion , Dry Condition , 28 day 1.00 - 1.10 N/mm2
Shear Adhesion , Dry Condition , 28 day 0.80 –1.00 N/mm2
Shelf Life 6 Months

Sand Gradation as per BS 1199

SURFACE PREPARATION

Ensure the substrate is clean and free dust , oil , grease and loose particles before application . Dampening of substrate is required before applying Tile Adhesive. Checking the Verticality/ plumb level of substrate is essential. Ensure that new concrete substrate/ Masonry wall is at least six weeks old and screeds/cement sand base coats is minimum 14 days old before applying such Adhesives.

MIXING AND APPLICATION

Approx. 22% water ( by weight of material ) is required for mixing . Mixing can be done either manually or with mechanical mixer/stirrer. It is advisable to use a mechanical Mixer to get homogeneous mix . The material should be applied within 90 minutes after preparation. It is recommended to apply Tile adhesive with a Notched Trowel that can provide minimum 3 mm thick layer. It is recommended to have thickness between 3-9mm. Grouting Activity can be taken after 24 hours. Designed/full Traffic be allowed after 48 hours of Installation.

CURING

No curing is required. Natural air curing is enough.

STORAGE AND PACKING

Speed Dry Mix – – TILE ADHESIVE LD is delivered in 20 Kg and 40Kg bag. Storage life is Six months if the product is stored in a dry place.

HEALTH AND SAFETY

  • Recommend to wear NIOSH approved or equivalent particulate face mask when mixing the material.
  • Material contains cement, which may produce an allergic effect.
  • Keep out of reach of children.
  • Material may cause irritation to eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical assistance. After contact with skin, wash immediately with plenty of soap and water. Avoid contact with eyes and prolonged contact with skin.

DISCLAIMER

It is assumed that all standard Civil Engineering Practices shall be adopted for application of Tile Adhesive. The information given in this leaflet is for general guidance only.